Walk-in Interview in Abu Dhabi: Al Nasr Contracting Welder and Fabricator Jobs, 4–21 November 2026

Walk-in Interview in Abu Dhabi: Al Nasr Contracting Welder and Fabricator Jobs, 4–21 November 2026

Al Nasr Contracting Company LLC is holding a walk-in recruitment open day in Abu Dhabi, hiring 100 welders and fabricators for its Oil & Gas projects — and the drive is still open. The interviews run Wednesday to Saturday, 9:00 AM to 3:00 PM, until Saturday 21 November 2026, at the company's premises in Mussafah 35. Today's session has already closed, but the next open day is tomorrow, Thursday 12 November 2026 — so if you are a welder or fabricator with Oil & Gas experience, get your documents ready tonight and walk in tomorrow morning. No appointment is needed and there is no online application. This post gives you the roles, the venue, and what to carry with you.

The company has not published a salary figure for these positions, and this post does not invent one. What the listings do say is that there are 100 vacancies — 50 welders and 50 fabricators — and that the work is on Oil & Gas projects. Ask about the salary, allowances and benefits at the interview, and get them confirmed in writing in your offer before you accept anything.

Who is hiring?

Al Nasr Contracting Company LLC is a major civil engineering and electromechanical contractor based in Abu Dhabi, established in 1972. It has been working in the UAE for more than five decades, and this recruitment open day is for its Oil & Gas projects — the kind of work where welding and fabrication quality is tested every day, and where experienced hands are always in demand.

For a welder or fabricator, that matters: you are being hired by an established contracting company, not a one-off agent, and the role is on real projects with a stated number of vacancies — 100 places — not a vague promise. The company has set aside a full open-day schedule, Wednesday to Saturday for three weeks, which tells you this is a volume drive with a real hiring need behind it.

What jobs are available?

Jobs in Abu Dhabi

Welder – Abu Dhabi (50 vacancies)

Al Nasr Contracting is hiring 50 welders for its Oil & Gas projects. Two welding specialisms are named in the listing:

  • Piping Welder 6G – SMAW / GTAW. Pipe welding in the 6G position, using shielded metal arc welding and gas tungsten arc welding — the standard qualification for high-pressure piping on Oil & Gas sites.
  • Pipeline Welder – Downhill / Dolly Mix. Pipeline welding using downhill and dolly-mix techniques, the methods used on cross-country and plant pipeline work.

If you hold one of these skills and have worked on Oil & Gas projects, this is the role to attend for. The hiring team will want to see your certificates and your experience, and welders are normally asked to demonstrate their skill — so be ready for a practical trade test and bring proof of your qualifications.

Fabricator – Abu Dhabi (50 vacancies)

Al Nasr Contracting is also hiring 50 fabricators for its Oil & Gas projects. Fabrication here means reading drawings, cutting, fitting and assembling steel structures and pipework to specification, ready for the welders to join. The listing asks for fabricators with experience in Oil & Gas projects, so bring evidence of the projects you have worked on and the kind of fabrication you have done.

With 50 places in each trade, this is a volume drive — arriving early in the window gives you the best chance of being seen before the team fills its list for the day. The interviews run until 3:00 PM, but the team sees candidates in order of arrival, so a 9:00 AM start is worth the early trip.

What is the salary and what is included?

The listings do not publish a salary figure for these positions, and this post does not invent one. That is honest, and it is also normal for contracting drives: the pay is usually discussed at the interview and depends on your trade, your test result and your experience.

What you should do is ask directly at the interview: the monthly salary, the working hours, overtime, accommodation and transport, and the visa and medical arrangements. Get the answers in writing in your offer letter before you sign anything. Do not accept a verbal figure as a promise, and do not pay any fee to anyone for processing, medicals or visas unless it is a clearly identified official government charge you pay yourself at the official counter.

Who can apply?

You can apply if you meet the conditions in the listing:

  • You are a welder with 6G piping or pipeline experience. Piping Welder 6G (SMAW/GTAW) or Pipeline Welder (Downhill/Dolly Mix) — bring your certificates and be ready to demonstrate your skill.
  • You are a fabricator with Oil & Gas project experience. The listing asks for fabrication experience on Oil & Gas projects, so be ready to talk through the work you have done, the drawings you have read and the structures you have built.
  • You can attend in person on an open day. The drive runs Wednesday to Saturday only — 12, 13, 14, 18, 19, 20 and 21 November 2026 remain. Sundays, Mondays and Tuesdays are not interview days.
  • You can join at short notice. Open-day drives are for immediate hiring, so be ready to start quickly if you are selected. If you are on a notice period, say so honestly at the interview rather than promising what you cannot deliver.

Where and when is the walk-in interview?

Interview dates: 4–21 November 2026, Wednesday to Saturday. Remaining open days: Thursday 12, Friday 13, Saturday 14, Wednesday 18, Thursday 19, Friday 20 and Saturday 21 November 2026. The last day is Saturday 21 November 2026.

Interview time: 9:00 AM to 3:00 PM.

Interview venue: Al Nasr Contracting Company LLC, Building No. 155, Mussafah 35, Abu Dhabi.

Enquiry WhatsApp (from the listing): +971 54 233 9509 — message the company if you need to confirm which day to attend.

Plan your trip before you leave. Aim to arrive close to 9:00 AM — the team stops seeing candidates when the window closes at 3:00 PM, and arriving in the last hour risks missing your turn if there is a queue. Morning is best: the 9:00 AM opening is when the team starts, and early arrivals are usually seen first.

How do you reach the venue?

Mussafah 35 is in the Mussafah industrial area of Abu Dhabi, where the big contracting companies and workshops are based. The venue is the company's own premises at Building No. 155 — look for the Al Nasr Contracting signage once you are in Mussafah 35.

The simplest way to get there is by taxi from central Abu Dhabi, or by bus to the Mussafah area and then a short taxi to Building 155. Allow extra time for the trip: Mussafah is an industrial zone with heavy-vehicle traffic, and the roads around the workshops can be slow in the morning. Leave early, keep the venue address and the WhatsApp number saved on your phone, and ask locally for Building 155, Mussafah 35 if you are unsure of the last turn.

What should you bring to the interview?

The listing asks for an updated CV and relevant documents. Carry the standard set that walk-in interviews for trades normally ask for — having them with you means you are not turned away for want of a paper:

  • Your updated CV, printed, with your trade, certificates and project experience clearly listed.
  • Your trade certificates and qualification cards — welding certificates (6G, SMAW/GTAW) for welders, fabrication and safety certificates for fabricators — originals plus copies.
  • Experience letters or service certificates from previous employers, especially Oil & Gas project work.
  • Your passport, plus a copy, and your Emirates ID if you hold one.
  • Your visa copy, if applicable.
  • Two or three recent passport-size photographs.
  • A pen, and a folder to keep your papers neat.

Dress as a tradesman going for a site job: clean, neat clothes and closed safety shoes if you have them. You are meeting a hiring team face to face, and first impressions count — but the real test is your certificates, your experience and, for welders, your hands. Be polite, be honest about what you can do, and be ready to answer questions about the projects you have worked on.

How does the day work?

Walk in, register with your CV, wait for your turn, and interview with the hiring team. For welders, be ready for a practical trade test — the team will usually want to see a weld before they decide, so treat the test as the interview itself and work cleanly and safely. For fabricators, expect questions about drawings, measurements and the kind of structures you have built.

There is no fee at any stage: a genuine employer never charges you for a job, a visa, or an interview. If anyone at or around the venue asks you for money, walk away and report it.

If you are selected, the team will tell you the next steps — usually document verification, a medical and a start date. If you are not selected on the day, ask politely what was missing so you know for the next open day. Either way, you leave knowing where you stand, which is the whole point of a walk-in: no waiting weeks for an email that never comes.

What happens after the interview?

If you are offered the role, read the offer before you sign anything. Check the salary figure, the working hours, overtime, accommodation and transport, and the visa sponsorship, and make sure they match what was discussed at the interview. Keep a copy of everything you sign. If the terms differ from what was advertised or discussed, ask why — and do not pay any fee to anyone for processing, medicals or visas unless it is a clearly identified official government charge you pay yourself at the official counter.

If the day does not work out, keep your certificates and documents ready: the drive runs until 21 November, so you can return on another open day, and contracting companies in Mussafah hire welders and fabricators all year round. Experienced 6G welders and Oil & Gas fabricators are always in demand across the UAE.

Frequently asked questions

How many jobs are available at the Al Nasr Contracting walk-in?

100 vacancies in total — 50 welders and 50 fabricators — for Oil & Gas projects.

When is the walk-in interview?

4 to 21 November 2026, Wednesday to Saturday, 9:00 AM to 3:00 PM. The remaining open days are 12, 13, 14, 18, 19, 20 and 21 November 2026, and the last day is Saturday 21 November 2026.

Where exactly is the interview?

Al Nasr Contracting Company LLC, Building No. 155, Mussafah 35, Abu Dhabi.

What welders are they looking for?

Piping Welders 6G (SMAW/GTAW) and Pipeline Welders (Downhill/Dolly Mix). Bring your welding certificates and be ready for a practical test.

What fabricators are they looking for?

Fabricators with experience in Oil & Gas projects — reading drawings, cutting, fitting and assembling steel structures and pipework.

What is the salary?

No salary figure is published in the listings. Ask at the interview and get the figure confirmed in writing in your offer before you accept.

Is there any recruitment fee?

No. A genuine employer never charges for a job, a visa or an interview. Never pay anyone who asks for money in connection with this drive.

Can I attend on a Sunday, Monday or Tuesday?

No. The drive runs Wednesday to Saturday only. The next open day after today is Thursday 12 November 2026.

Do I need an appointment?

No. This is a walk-in interview — attendance in person is the application. You can also message the listing's WhatsApp number, +971 54 233 9509, for more information.

Related reading: Engineer at ADNOC, Abu Dhabi · Senior Vice President – Project Management at Aldar Properties, Abu Dhabi

No comments:

Post a Comment